adescor_products_largehole-perforator_big

ADESCOR offers a machine for the perforating of small diameter pipe. The basic perforator
is setup to drill 3 rows of holes down the pipe. Other configurations are possible. The hole-to-hole spacing needs to be specified at order placement.

The Large Hole Perforator uses shank arbors for the mounting of the cutter bits which can drill various diameter holes. If required, the machine can be configured for inline bell detection.

The Large Hole Perforator has a servo driven shuttle carriage with the drill bits mounted on three arms. The repeat pattern is easily adjusted with a touch screen control.

FEATURES

Pipe diameters 75 to 150mm
Integral bell detect and skip
480 Volt, 20 Amps. 3 Phase
Forklift pockets provide for easily moving into and out of line
Base Machine 4.3m. long, 1.6m wide, 2.4m high, conveyor extra

SPECIFICATIONS

Click to download the Large Hole Perforator Spec Sheet
pdf_icon

 

» Pipe Cut-offs » Spin Welders » Inner Liner Trimmers » Conveying / Handling » Fabricated Fittings » Scrap Converter» Large Hole Perforator » Test Equipment