ADESCOR inc. designs and manufacturers robust, simple, high-speed machinery focusing on downstream solutions for the plastic pipe industry.

SPIN WELDERS

ADESCOR inc. welders use a spinning head to create a friction weld between the pipe and coupler.  Machines can be designed to perform face welding or outside diameter welding and are capable of operating with HDPE or polypropylene products.  Cycle times are as low as 10 seconds for 110 mm ID pipe for the double head model.

Automatic spin welding systems are set up as an in-line process with automatic coupler loading.  The conveying system accepts pipe from the production line, with a bypass capability.  The pipe length is clamped to the machine bed while the coupler is attached to the spinning head.  The clamping system ensures the best possible pipe to coupler alignment during the welding process.  The finished product is then automatically discharged to the run-out table.

ADESCOR inc. control systems allow for simple data set-up for each pipe resulting in rapid, repeatable, size changes and ease of operation. Quality assurance options include weld amperage monitoring and leak testing systems.

Semi-automatic face welding systems are also available and require manual loading of couplers and pipe lengths.  Cycle times are dependent on operator material handling speed.

All machine functions, for all models, are controlled by a PLC (Programmable Logic Controller) and operator interface panel.  The electrical and pneumatic systems can be designed to accommodate specific customer requirements.

ADESCOR inc…. providing practical solutions to improve productivity, lower costs and increase profitability while enhancing operator safety.