Large Hole Perforator
for efficient plastic pipe extrusion
- Downstream Equipment
- Large Hole Perforator
ADESCOR offers a machine for the perforating of small diameter pipe. The basic perforator is setup to drill 3 rows of holes down the pipe. Other configurations are possible. The hole-to-hole spacing needs to be specified at order placement.
The Large Hole Perforator uses shank arbors for the mounting of the cutter bits which can drill various diameter holes. If required, the machine can be configured for inline bell detection.
The Large Hole Perforator has a servo driven shuttle carriage with the drill bits mounted on three arms. The repeat pattern is easily adjusted with a touch screen control.
› Pipe diameters 75 to 150mm
› Integral bell detect and skip
› 480 Volt, 20 Amps. 3 Phase
› Forklift pockets provide for easily moving into and out of line
› Base Machine 4.3m. long, 1.6m wide, 2.4m high, conveyor extra
» Pipe Cut-offs » Spin Welders » Inner Liner Trimmers » Conveying / Handling » Fabricated Fittings » Scrap Converter » Large Hole Perforator » Test Equipment » Wrappers » Bandsaws » Coilers » Part Detection Equipment » Servo Perforators » Sheet Winders » Full Downstream Solutions